Urich Power Control Center.

Back to Products

  URICH power control centres are suitable for up to 4000A,Our enclosures are type tested and conforms to forms of construction upto Form- 4 Type- 7 . The panels are tailor made to suite the requirement of the system with main busbar at top or bottom.The panels are robust in construction with front or rear access.It is impossible to withdraw a live circuit breaker, open the door in live condition.

  Panels are designed for all types of ACBs fixed and withdrawable types.

  Bus Bar system is fully rated and braced to withstand the short circuit currents and fully segregated from incoming and outgoing circuit breakers. Power control centres are connected by cables or bus duct on top to the supply transformers.

  PLCs are used to make the system fully automatic.Incoming feeder interlocks,synchronization,remote control and monitoring can be provided.Standard metering and Microprocessor Based Network Analyser can be provided on incomer and outgoings circuit breakers.

  Communication of power network parameters is provided with RS485 modbus.

  The panels are designed on current applicable standarads,user aspects are embedded in the enclosure manufacturing system concept .So panels are very safe.

  The enclosures are tested under various environmental conditions which demands resistance against corrosion,scratching and ageing which requires high quality painting.

  The enclosures are sheet steel electrogalvanised with enclosure thickness to 1.5mm, door 1.5mm and mounting plate 2mm thick. Surface treated by decreasing, zinc phosphating, powder coating and oven cured with colour finish Enclosure body RAL 7032.

  Mounting Plate RAL 2000 with option to choose any RAL colours.

  The enclosures made to IP 30/44/54/55/65, all accessories are European make.

  The switchgear components used are of all European make.
  The panels are designed to suite the system and customer requirements.
  Urich use ASTA & KEMA certified panel system in compliance with consultants and contractors and authorities specifications, wherever required.

Rating : Upto 4000A. Incomer : ACB,MCCB. Outgoings : MCCBs. Metering : Ammeter,Voltmeter,kwh meter as per client’s. Construction : Form2,3,4 design. Busbar : High conductivity hard drawn electrolytically tinned copper Busbars, colour coded and sleeved,busbar supports are of glass reinforced polyster material fire retardant grade.

Fault level withstand 50 kA RMS max.


Contact Information

URICH Group of Companies

Building No.: 2599, Way No.: 6529,
P.O Box: 612, PC: 112, Ruwi,
Muscat, Sultanate Of Oman.
Ph: +968 24811571, 24811676
Fax: +968 24813820
eMail: info@urichgroup.com

Share with Others